| |
|
ECONOMICAL BENCH MACHINE
|
| MODEL
RWE-ECOM |
The RWE-ECON is an economical bench model with a LED
counter and incorporates the famous RUFF modular system with 24 interchangeable
standard heads. It’s designed with quality components: 3-phase motor
for head drive, gearbox and clutch for core drive and electro mechanical
parts. It is built with all necessary functions which are needed for
simple winding and taping applications,
but at the same time retains the high standard of quality and construction
techniques as all RUFF machines. The very practicle layout of the
controls make it extremely quick to set up, easy to use and simple
to maintain. It requires very little operator training.Typical buyers
of the RWE-ECON are factories in low labour cost countries or taping
departments in transformer factories. |
 |
| |
TECHNICAL DATA: |
| · |
CONTROLLER: |
| |
INTEGRAL WITH 1 ELECTRONIC COUNTER
|
| · |
LED-DISPLAY:
|
| |
CONTINOUS READ OUT OF TURNS COUNTED
|
| · |
PRESETS: |
| |
1 PROGRAM FOR LOADING TURNS
1 PROGRAM FOR WINDING TURNS
AND PUSH BOTTON FOR REPEAT OF WINDING
CYCLE
|
| · |
PROGRAMMIING: |
| |
INSTANT SET-UP
|
| · |
DATA MEMORY AND OUTPUT: |
| |
10 YEARS WITH NV-RAM
|
| · |
WINDING SPEED: |
| |
UP TO 1800 RPM
|
| · |
CORE DRIVE: |
| |
INFINITELY VARIABLE WITH POWER GEARBOX
|
| · |
WIRE PITCH CONTROL: |
| |
OPERATOR DIAL KNOB
|
| · |
CORE REVERSE CONTROL: |
| |
OPERATOR SWITCH
|
| · |
CORE INDEX CONTROL: |
| |
OPERATOR HAND WHEEL OR SEMIAUTOMATIC
WITH HAND LEVER
|
| · |
ACCELLERATION: |
| |
AUTOMATIC |
| · |
DECELERATION: |
| |
OPERATOR FOOT PEDAL
|
| · |
STOPS FOR TAPS: |
| |
INDIVIDUAL OPERATOR CONTROL
|
| · |
SECTOR / BANK WIND CONTROL: |
| |
BY OPERATOR CLUTCH SWITCH
|
| · |
TAPING OPERATION: |
| |
OPERATOR CONTROLLED WITH
AUTOMATIC TAPE CUT
|
| · |
WINDING HEAD DRIVE: |
| |
ELECTRONIC 3-PHASE MOTOR, 1,5 HP
|
| · |
SUPPLY VOLTAGES: |
| |
230 (110 AND 240) VOLT 50 HZ AC
|
| · |
MACHINE SIZE AND WEIGHT: |
| |
450 x 600 MM / 70 KG NET / 100 KG GROSS
|
|
| COMBINATION
CAPABILITY: |
| 24 HEADS |
| 6 GEAR
HEADS
RW0,1,2,3,4,4-V |
| 5 SLIDER
HEADS
RW10,20,25,30,40 |
| 6 BELT
HEADS
RW60-C,100-C,100,200,200-V,300 |
| 7 TAPING
HEADS
RW0/B,1/B,2/B,3/B,4/B,200/B,300/B |
| 6 ROLLER
TABLES
RW111,111-V,112,222,222-V,332 |
PRODUCTION
CAPABILITY |
|
inch/AWG |
mm |
- SINGLE WIRE SIZE: |
11 - 44 |
0,05 - 2,5 |
- BIFILAR WIRE SIZE: |
up to 2x13 1/2 |
up to 2x1,8 |
- FINISHED CORE O.D.: |
0,2 - 14 |
5 - 350 |
- FINISHED CORE I.D.: |
from 0,06 |
from 1,5 |
- FINISHED CORE HEIGHT: |
up to 5,9 |
up to 150 |
- TAPE SIZES: |
0,15 - 1,18 |
4 - 30 |
|
| |
|
